Aqua Computer Aquainlet Plug- On Intake Water Reservoir

Aqua Computer Aquainlet blue inlet reservoir for Aquastream pump
The Aqua Computer Aquainlet is a plug on reservoir that attaches to an Eheim 1046, 1048 or Aquastream pump. This reservoir slides over the front intake port of the pump and a rubber o-ring seals the connection to prevent any leaking. This Aquainlet reservoir is made of anodized blue aluminum with a G1/8 thread on the front to insert a fitting. The screw cap on the top is removable to allow the Aquainlet to act as fill and bleed device.
|
| Includes: |
| 1) Aquainlet Plug On Reservoir |
| 2) Aluminum Cap & O-Ring |
| Options: |
|
|
| Use the Aqualinlet to attach to the front intake side of an Aquastream pump to act as a fill and bleed reservoir. The bottom is flush with the base of the pump to enable the assembly to sit flat. With a G1/8 fitting on the front the Aquainlet is used as an intake reservoir providing water to the pump. |
| Fittings: |
| pc-s |
Plug & Cool Straight Fitting for use with 6mm ID x 8mm OD AC Tubing |
| cmp6x1 |
Nickel Plated Straight Compression Fitting for use with 6mm ID x 8mm OD Tubing |
| cmp8x1 |
Nickel Plated Straight Compression Fitting for use with 8mm ID x 10mm OD Tubing |
| barb38 |
Nickel Plated Straight Barb Fitting for use with 3/8" ID Tubing |