Eheim 1048 Centrifugal Water Pump w/ Fittings - 158 GPH

Description:

The Eheim 1048 centrifugal water pump produces 158 gallons per hour flow rate. This pump is designed for extreme water cooling conditions where an ample amount of flow rate is required. Eheim is an extremely stable pump suitable for constant operaiton and with a long life span. This pump can operate in and out of water so it can be used inline with your water cooling system or submersed in a tank. This pump can deliver an output lift of about 5 feet up from the pump. Special adapter fittings for the intake and outlfow ports have been included in order for you to screw in an appropriate G1/4 threaded fitting (see below for a description of these fittings).

Special Features :


The 1048 pump requires a 115V wall socket power source and is suitable for constant operation. This pump has a maximum lift of 1.5 meters straight up from the outflow nozzle. This pump also operates at a very quiet noise level.


The protective front cap shields the intake end and can also be used as a filter when the pump is submersed. The included nickel plated intake and outflow adapters convert the pump's ports to a G1/4 thread to make this pump water cooling compatible with many different fittings.

Specifications:
Max Flow Rate:	158 gph (~10 l/min)
Power:	115V / 60 Hz / 10W
Max Lift:	4.92' (1.5M)

Intake & Outflow Adapter Fittings:


al-13500: The intake extension screw adapter screws into the front intake side of the pump	al-13502: The 1048 extension fitting screws into the top outflow side of the pump

Fittings:
pc-s	Plug & Cool Straight Fittings for use with 6mm ID x 8mm OD AC Tubing
barb38ps	Nickel Plated Straight Perfect Seal Fittings for use with 3/8" ID Tubing