Hydor L35 Centrifugal Water Pump w/ Fittings - 450 GPH

Description:

The Hydor L35 centrifugal water pump produces an enormous 450 gallon per hour flow rate. This pump is designed for extreme water cooling conditions with one of the highest outputs on the water cooling market. This pump can operate in and out of water so it can be used inline with your water cooling system or submersed in a tank. We have included the pump adapter extension fitting to allow for a G1/4 fitting of your choice to be screwed in to make this pump compatible with just about any size tube.

Special Features:

The L35 pump requires a 115V wall socket power source and is suitable for constant operation. This pump has a maximum lift of 6.7 feet straight up from the outflow nozzle. This pump also operates at a very quiet noise level.

The protective front cap shields the intake end and can also be used as a filter when the pump is submersed. This pump comes with plastic barbed fittings for use with 1/2" ID tubing. Optional compression fittings are available to make this pump work with other water cooling systems. This pump has rubber suction cup feet to attach to the base of your case which also help to dampen the vibration created during operation.

Specifications:
Max Flow Rate:	450 GPH
Power:	115V / 60 Hz / 19 W
Max Lift:	6.7 ft (2.04M)
Tube Size:	1/2" ID

Adapter Extension Fittings (wc-hdex included):


Remove front plate from pump and blue screw on guard, then screw in Hydor Extension Fitting .	Screw fitting into top (outflow) end of pump	Each fitting is compatible with both intake (front) and outflow (top)	Re attach blue screw on guard


Choose Fittings Option:

A G1/4 theaded Fitting now fits into the extension fitting to make the Hydor pump work with any tube size of your water cooling setup.

Fittings:
pc-s	Plug & Cool Straight Fittings for use with 6mm ID x 8mm OD AC Tubing
barb38ps	Nickel Plated Straight Perfect Seal Fittings for use with 3/8" ID Tubing